Relex Imaging
  • Home
  • PRODUCTS
    • Tech & Spec
    • CASE STUDY
  • About
  • Contact

Technology

The LAMM technology allows users to develop a solution based on a collection of highly accurate,  lower cost sensor devices, networked together, with simple retro reflector targets.

This approach can achieve high precision, large volume coverage, information redundancy and flexibility at a lower cost compared with existing systems. Measurement systems can be integrated into production cells for continuous use, drastically reducing the time needed for workpiece or manufacturing cell re-configuration, and optimising calibration procedures.

The LAMM as standard detects multiple objects in its plane of view and generates position and width data for each object, at a high refresh rate. Objects can be detected over a wide range using the standard LAMM.
​
The object information is transmitted over an Ethernet or CAN network to be  processed by the user’s control system. Additionally, user applications can be readily embedded in the LAMM firmware to provide high speed distributed parallel processing, simplifying the need for additional user systems and potentially providing higher performance and responsiveness.
​A standard application using Reflex Imaging’s patented smart target technology uses a low cost reflective target piece to determine precise object positioning in three dimensions, using a single LAMM. Collision avoidance and movement detection functions are built into the LAMM  as standard, with a programmable single-wire output for simple system control. Future releases will allow the target to be tracked in 3 dimensions using a single LAMM.
​
An application being developed with the AMRC group aims to use two LAMMs networked together to continuously confirm the positioning of a robot to an accuracy of better than 0.5mm. A future project will look at directly integrating the feedback to control the robot in real time.
 
The LAMM is specifically designed to simplify system integration and development. A USB interface to a PC application enables rapid development and prototyping of user applications; with full monitoring and control of each LAMM.
​
Contact Reflex Imaging to discuss how multiple distributed precision measurement systems can transform your factory for the future.

Download Datasheet

LAMM_datasheet
File Size: 3435 kb
File Type: pdf
Download File

Picture

Specification

Performance

Picture

Electrical

Picture

Mechanical

Picture

Safety & Regulatory

Picture

Note:

​The LAMM products contain a laser device and are not currently approved for sale in the United States of America.
​Please contact us for more information.

Disclaimer:

Specifications are subject to change without notice. Information provided by Reflex Imaging is believed to be accurate and reliable, however, no responsibility is assumed by Reflex Imaging for its use. The user must test all products for suitability in a particular application before use.
Reflex Imaging makes no representations or warranties of any kind concerning this data, unless specifically stated. No license is granted under any patent or patent rights of Reflex Imaging. Trademarks and registered trademarks are the property of their respective owners.
Picture

Company

Home
Products
About 

Support

Contact
Privacy Policy
Reflex Imaging Limited
Bailey House
Barttelot Road
Horsham
​West Sussex RH12 1DQ
© COPYRIGHT 2018 REFLEX IMAGING. ALL RIGHTS RESERVED.
  • Home
  • PRODUCTS
    • Tech & Spec
    • CASE STUDY
  • About
  • Contact